The Best Advice on I’ve found

What to Do When Changing Coolant on Your Car

Fluids are important to keep your car running excellently. One of the important fluids that your car must have is the antifreeze or coolant. This is needed to sure that your car will not overheat. This one works by absorbing excess heat in your engine. This is the reason why you will need to keep it on its normal level.

It is important to see to it that you are able to change your coolant depending on the mileage that it has. Changing your coolant after 60,000 miles up to 100,000 miles is what you will need to do. Checking your manual to know when you should change your coolant is a thing that you can also do. You need to remember that your coolant should not run low. t is your radiator that might have a leak once your coolant runs low.

If you plan on doing this on your won then see to it that you will be able to buy a new coolant for your car. A radiator flush product is also a thing that you will need to by. It is clearing out your cooling system that you are able to do with this one. Once you are ready with theses things then there are steps that you will need to follow.

Once you are chagrin your coolant then the first thing that you need to do is to mind your safety firs. Always remember to not change your coolant while your engine is running. Let the engine cool down first before doing the procedure.

What you need to do next is to remove the radiator cap and locate the drain plug. See to it that you are able to place a pan under the drain plug so that you can catch the old coolant. Once you are ready, you can now loosen the plug and let the coolant drain into the pan.

The next thing that you will need to do is to fill the cooling system with water. This is done to ensure that the remaining coolant will be flushed out.

Putting the radiator cap back and running the car for at least 10 minutes is what you will have to do next. This will help keep the water flowing. Turn of the car and let it cool again. See to it that you are able to do this one at least 3 more times.-this service

What you need to do next is to out the radiator flush into the cooling system. Put the radiator cap and let the engine run again.

Once you are done, let the engine cool down again. You can now close the drain plug and our the coolant into the cooling system.

This article was written by .

Leave a Reply

Your email address will not be published. Required fields are marked *